Report this message as spam or having improper contents
Thank you for reporting improper contents. Reported messages will normally be checked manually within 24 hours. To avoid misuse of this forum by programmed robots, we have to ask for the characters in the picture below.
RE: Billy
Bwah said 2008-05-27 05:55
Ta for the reply. Yes - have figured out the change light and set it to 10K, but will be useless I feel. Indeed the bike does have a Yoshi pipe and could explain the FI issue - it goes away when warmed up - but has some serious dips in revs v early on, prior to warm. COuld be pipe related fuel/air mix etc. Runs a bit rough down low but screams so clean up high in the revs, so not too concerned. I will aim for cold tyre pressures 30/28 f/r - what do you run on? By warm should be 32/33 or so. Have put on flush mount front indicators and led rears - but the left is flashing quickly but the right indicators are fine - any experience with Electrics? I will have to swap over the fronts to see if there is a difference. Do you have a recommended OIL that you use? I am planning to do as much servicing as I can. Running Iridium plugs at moment, they can sometimes run the electrics a bit hot and cause issues down the line - any experience with that?? Ta for any feedback, appreciate it heaps.